Figure · Domechy
Mecha Silat Warrior
A futuristic warrior fusing traditional silat attire with robotic armour. AI-assisted design, prepared for 3D printing by Domechy. Best results on resin — paintable to any colourway.
Delivered via Payhip. Your email may be used for occasional Domechy updates. Unsubscribe anytime.
About this model
Silat tradition. Mecha armour. One character.
The Mecha Silat Warrior is an original AI-assisted character inspired by silat — the Malay martial art — reimagined as a mechanised fighter. Traditional details like the tanjak headwrap and flowing sampin sit alongside segmented robotic armour, glowing visor, and a wide, grounded stance.
This is a display figurine intended to be printed, cleaned, primed, and hand-painted. The render shows a gold, deep red, and matte black colourway — but the final look is yours to decide.
STL file
Single-piece character model for 3D printing.
README + print notes
Resin and FDM guidance, painting notes, and support strategy notes included in the ZIP.
Personal use license
Free for personal printing and gifting. Commercial use requires written permission.
Recommended print settings
Resin gets the best results on this one.
| Printer Type | Resin (SLA/MSLA) — recommended |
| Layer Height | 0.05 mm |
| Orientation | Angled 30–45° |
| Supports | Auto + manual touch-up |
| FDM Option | Possible — fine detail may be lost |
| FDM Layer Height | 0.12 mm or lower |
| Painting | Required — STL has no colour data |
Painting Notes
- Clean and cure resin prints, or sand FDM prints lightly before priming.
- Use two thin coats of grey primer before applying colour.
- Reference colourway: gold on fabric areas, deep red on armour panels, matte black for joints and details.
- A black wash into recesses adds depth. Dry-brush lighter gold on armour edges for a worn look.
- For the eyes, use an orange-red base with a bright white or yellow centre dot.
