Kenapa Bucu 3D Print Terangkat dan Cara Mengatasinya?

Pernah tak hasil cetakan nampak elok pada awalnya, tetapi selepas beberapa layer, bahagian bucu mula terangkat daripada build plate?

Saya Ingat Ini Spaghetti Failure Biasa. Rupanya Masalah Bed Adhesion I Thought It Was Random Spaghetti Failure. It Turned Out to Be a Bed Adhesion Problem

Kes troubleshooting sebenar di mana cetakan 3D berulang kali gagal pada ketinggian yang sama dan bertukar jadi spaghetti. Punca sebenarnya bukan filament atau setting printer. Ia masalah bed adhesion. A real-world troubleshooting case where a 3D print repeatedly turned into spaghetti at the same height. The root cause wasn't the filament or the printer settings. It was a bed adhesion problem.

Overhang & Bridging: Dua Masalah Biasa Dalam Cetakan 3D

Learn what causes overhang and bridging failures and which settings can improve the result.

3D Printing Problems & Solutions (Fix Adhesion, Warping, Stringing) Masalah Cetakan 3D: Punca dan Penyelesaian

In the world of 3D printing, issues can occur both during the printing process and after a print is completed. In this article, I’ll… Three common printing problems and practical steps to identify and fix each one.